Outback L.L.Bean Edition AWD F6-3.0L (2002)
Evaporator Case: Service and Repair
Removal and Installation
Intake Unit
REMOVAL
1. Using refrigerant recovery system, discharge refrigerant. <Ref. to OPERATION, Refrigerant Recovery Procedure.>
2. Disconnect ground cable from battery.
3. Remove bolts securing expansion valve and pipe in engine compartment.
4. Remove instrument panel. <Ref. to REMOVAL, Instrument Panel Assembly.>
5. Remove keyless unit and CRU unit.
6. Disconnect sunroof connector.
7. Disconnect servo motor connector.
8. Disconnect heater blower power transistor connector.
9. Disconnect heater blower motor connector.