Front Catalytic Converter Service and Repair
Tightening Torque: 30 Nm (3.1 kgf-m, 22.4 ft-lb)
2. Install front exhaust pipe. And temporarily tighten bolt which installs front exhaust pipe to hanger bracket.
3. Tighten bolts which hold front exhaust pipe onto cylinder heads.
Tightening Torque: 30 Nm (3.1 kgf-m, 22.4 ft-lb)
4. Install front exhaust pipe to rear exhaust pipe.
Tightening Torque: 18 Nm (1.8 kgf-m, 13.0 ft-lb)
5. Tighten bolt which holds front exhaust pipes to hanger bracket.
Tightening Torque: 35 Nm (3.6 kgf-m, 26.0 ft-lb)
