Outback L.L.Bean Edition AWD F6-3.0L (2002)
Valve Clearance: Testing and Inspection
INSPECTION
CAUTION: Inspection and adjustment of valve clearance should be performed while engine is cold.
1) Set the vehicle on the lift.
2) Disconnect battery ground cable.
3) Lift up the vehicle.
4) Remove under cover.
5) Lower the vehicle.
6) Place suitable container under the vehicle.
7) When inspecting RH side cylinder.
(1) Remove air intake duct and air cleaner case.
(2) Remove V-belt.
(3) Remove power steering hose from bracket.
(4) Remove bolts which install power steering pump bracket.
