Outback L.L.Bean Edition AWD F6-3.0L (2002)
6. Remove bolt A.
2.5 l model: Disconnect pipe C from oil pump. Disconnect pipe D from return hose.
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
3.0 l model: Disconnect pressure hose from oil pump. Disconnect return hose from return hose
CAUTION:
^
Do not allow fluid from the hose end to come into contact with pulley belt.
^
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
B: INSTALLATION
1. Tighten bolt A.
CAUTION: Visually check that hose between tank and pipe D is free from bending or twisting.
2.5 l model: