Outback L.L.Bean Edition AWD F6-3.0L (2002)
CAUTION:
^
Check ball joint for free play, and tie-rod for bends. Replace if necessary.
^
Check dust seals used with tie-rod end ball joint for damage or deterioration. Replace if necessary.
10. Loosen adjusting screw and remove spring and sleeve.
CAUTION: Replace spring and/or sleeve if damaged.
11. Remove two bolts securing valve assembly.
12. Carefully draw out input shaft and remove valve assembly.
13. Using a sharp pointed pliers, rotate the rack stopper in the direction of the arrow until the end of the circlip comes out of the stopper. Rotate the
circlip in the opposite direction and pull it out.