Outback L.L.Bean Edition AWD F6-3.0L (2002)
5. Using ST1, ST2 and a press, remove ball bearing, synchro cone and baulk ring (Rev).
NOTE:
^
Replace sleeve and hub with new ones. Do not attempt to disassemble because they must engage at a specified point. If they should be
disassembled, mark engagement point on splines beforehand.
^
Do not reuse ball bearing.
ST1 499757002 INSTALLER
ST2 498077400 SYNCHRO CONE REMOVER
6. Using ST1 and ST2, remove the rest of parts.
NOTE: Replace sleeve and hub with new ones. Do not attempt to disassemble because they must engage at a specified point. If they should be
disassembled, marking engagement point on splines beforehand.
ST1 899864100 REMOVER
ST2 899714110 REMOVER
ASSEMBLY