Outback [Legacy] AWD F4-2.5L DOHC (1996)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit For ABS System [5.3 Type]
Removal
REMOVAL
HYDRAULIC UNIT
1) Disconnect ground cable from battery.
2) Remove air intake duct and canister from engine compartment to facilitate removal of hydraulic unit.
3) Disconnect connector from hydraulic unit.
4) Unlock cable clip.
5) Disconnect brake pipes from hydraulic unit.
CAUTION: Wrap brake pipes with vinyl bag to avoid spilling brake fluid on vehicle body.
6) Remove nuts and bolt which secure hydraulic unit bracket, and remove hydraulic unit from engine compartment.