Outback [Legacy] AWD F4-2.5L DOHC (1996)
4) Apply fluid packing to mating surfaces and install oil pan.
Fluid packing:
THREE BOND 1207C or equivalent
5) Tighten bolts which install oil pan onto engine block.
Tightening torque:
9.8 Nm (1.0 kg-m, 7 ft-lb)
6) Tighten drain plug.
Tightening torque:
44 - 48 Nm (4.5 - 5.0 kg-m, 33 - 36 ft-lb)
CAUTION: Replace drain plug gasket with new one.
7) Lower engine onto front crossmember.
8) Tighten nuts which install front cushion rubber onto front crossmember.
Tightening torque:
69 ± 15 Nm (7.0 ± 1.5 kg-m, 51 ± 11 ft-lb)
