Outback [Legacy] AWD F4-2.5L DOHC (1996)
Brake Lamp: Diagram Information and Instructions
Allowable Current Level of Wires
The table in the image lists the nominal sectional areas and allowable currents of the wires.
Allowable Current Level Of The Wires
CAUTION: When replacing or repairing a wire, be sure to use the same size and type of the wire which was originally used.
NOTE
^
The allowable current in the above table indicates the tolerable amperage of each wire at an ambient temperature of 40° C (1O4° F).
^
The allowable current changes with ambient temperature. Also, it changes if a bundle of more than two wires is used.
Connector Number Identification
Connector Number Identification
11) Each connector number shown in the wiring diagram corresponds to that in the wiring harness. The location of each connector in the actual vehicle
is determined by reading the first character of the connector (for example, a "F" for F8, "i" for i16, etc.) and the type of wiring harness.
The first character of each connector number refers to the area or system of the vehicle, as indicated below.
