Outback AWD F4-25L DOHC (1996) Air Bag Control Module Component Description Page
Air Bag Control Module: Testing and Inspection
Inspection and Replacement Standards
A: VEHICLES WHICH BECOME INVOLVED IN A COLLISION
If the vehicle equipped with an SRS airbag system is damaged in a collision, the airbag system parts must be checked and replaced in accordance with
the following standards:
-
After faulty parts are replaced, the warning light operation must be checked.
-
When the ignition switch is turned ON, it lights up for about 7 seconds and then it goes out for at least 30 seconds.
-
The trouble code stored in memory must be erased after the check.
B: AIRBAG CONTROL MODULE
1. INSPECTION STANDARD
-
A vehicle damaged in a collision (regardless of whether or not airbag is deployed).
-
The designated trouble code is output during self-diagnosis.
2. REPLACEMENT STANDARD
-
Airbag diagnostic module is cracked or deformed.
-
Mounting bracket is cracked or deformed.
-
Connector is scratched or cracked.
-
Airbag diagnostic module dropped to the floor/ground.
-
Airbag diagnostic module determined as faulty during diagnostics.
-
Airbag is deployed.
