Outback Sport F4-2.5L SOHC (2005)
Alarm Module: Service and Repair
Security Control Unit
Security Control Unit
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the glove box.
3. Disconnect the connector from the security control unit.
4. Remove the security control unit.
INSTALLATION
Install in the reverse order of removal.
Tightening torque (Security Control Unit Bracket): 10 ± 1.5 N.m (1.0 ± 0.15 kgf-m, 7.5 ± 1 ft-lb)