Outback Sport F4-2.5L SOHC (2005)
11)
Wrap all of the wires with electrical tape to the harness (See Figure 7 and 8).
12)
Secure the TPMS wiring harness to the harness that runs vertically to the cross member (See Figure 9).
13)
Reposition carpet.
14)
Install driver's side sill plate.
15)
Reinstall driver's side seat (refer to the applicable Subaru Service Manual).
16)
Install floor mat.
17)
Connect the negative battery terminal.
18)
Reset radio stations and clock.
CLAIM REIMBURSEMENT/WARRANTY INFORMATION
For vehicles within the Basic New Car Limited warranty period, this repair can be claimed using the table.
Disclaimer
