Outback Sport [Impreza] AWD F4-2.2L SOHC (1997)
![background image](/subaru/outback_sport_[impreza]_awd/f4-2.2l_sohc/Page-1190001.png)
Shift Solenoid: Service and Repair
Shift Solenoid, Duty Solenoid and Valve Body
Removal
1. Clean transmission exterior.
2. Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.
Tightening torque: 25 +/- 2 Nm (18.1 +/- 1.4 ft. lbs.).
3. Remove oil pan and gasket.
NOTE: Drain oil into a container.
4. Disconnect solenoid valve connectors. Remove connectors from clips and disconnect connectors at 4 places.
5. Remove oil strainer. Disconnect oil pipe by removing the two bolts, and remove four bolts and oil strainer.
NOTE: Be careful because oil flows from oil strainer.