Outback VDC Wagon AWD F6-3.0L (2002)
8. Measure the clearance between threaded end of stop light and stopper.
If it is not in specified value, adjust it by adjusting position of stop light switch.
CAUTION: Be careful not to rotate stop light switch.
Stop light switch clearance: A 0.3 mm (0.012 inch)
9. Apply grease to operating rod connecting pin to prevent it from wearing.
10. Bleed air from brake system.
Tightening torque (Air bleeder screw): 8 Nm (0.8 kgf.m, 5.8 ft. lbs.)
11. Conduct road tests to ensure brakes do not drag.