Outback VDC Wagon AWD F6-3.0L (2002)
Tightening torque: 120 Nm (12.2 kgf-m, 88 ft. lbs.)
C: DISASSEMBLY
Using ST, press bushing out of place.
ST 20099AE010 INSTALLER & REMOVER
D: ASSEMBLY
1. Using ST, press bushing into place.
ST 20099AE010 INSTALLER & REMOVER
CAUTION: Outer bushing has a "directional" design. Be sure to install bushing with longer inner housing side facing vehicle rear.
E: INSPECTION
Visually check link upper for damage or bends.
Stabilizer Link Front
A: REMOVAL
1. Loosen wheel nuts. Lift-up vehicle and remove wheel.
2. Use transmission jack to support rear arm horizontally.
