Sedan 2WD F4-1781cc 1.8L (1983)
Brake Pad: Technical Service Bulletins
Brakes - Brake Pad Rust Prevention
PREVENTIVE MEASURE FOR SURFACE RUST AROUND DISK BRAKE PAD
If you encounter a complaint that the brake pad is not sliding properly or that a squeaking type noise can be heard even though the brake performance is
normal, and the vehicle is operated in the salt belt or coastal areas, there is a possibility the brake pad portion may have some surface rust on it. The cure
is to apply a thin coat of grease (Molykote AS-880N or equivalent) to the parts as shown below.
1) Apply a thin coat of Molykote AS-880N (P/N: K0777YA010) or equivalent to frictional portion between pad and inner shim.