SVX L6-3.3L DOHC (1992)
a)
Install hose (C) onto the transmission outlet pipe. (See Figure 6.)
b)
Make sure the chafe protector is in its correct position over top of the lower radiator hose.
COOLER OUTLET BOSE TO TRANSMISSION PIPING INSTALLATION
a)
Install the cooler outlet hose (B),from the radiator outlet pipe to the transmission inlet piping. Reuse the clip which holds the inlet and outlet hose
together. (See Figure 7.)
TRANSMISSION SIDE INLET AND OUTLET HOSE INSTALLATION
a)
Install the two remaining hoses on the inlet and outlet pipes on the transmission side. (See Figure 8.)
STARTING AND INSPECTION
a)
Start the engine and inspect the filter and hoses for leak. Tighten the hose clamps as necessary. Also, make sure all hoses are not kinked or
restricted in any way. Check the transmission oil level and add, if necessary.
b)
Reinstall the front lower splash guard in the reverse order of removal.