SVX L6-3.3L DOHC (1992)
![background image](/subaru/svx/l6-3.3l_dohc/Page-1456001.png)
Power Steering Fluid Cooler: Service and Repair
REMOVAL
1. Disconnect battery earth terminal.
2. Drain approximately 0.3 liters (0.3 US qt.) of fluid from oil tank.
3. Remove belt cover.
4. Remove radiator bracket.
5. Disconnect radiator fan connector.
6. Remove main and sub radiator fans.
7. Separate canister from bracket and leave as it is.
8. Raise vehicle.
9. Remove under cover.
10. Remove bolts securing oil cooler with condenser from both sides.
11. Slightly lift and move radiator assy and draw out oil cooler.
12. Disconnect hoses A and B at points indicated in the figure and remove oil cooler.