subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T > < Diagram Information and Instructions|Page 2786
Page 1
background image

Throttle Position Sensor: Adjustments

Throttle Sensor Adjustment

1.

Check resistance between throttle sensor terminals #2 and #3.

2.

Readings should be:

10 - 12 K ohms - throttle fully closed
3 - 5 K ohms - throttle fully open

3.

If readings are not as specified, loosen throttle sensor mounting screws and rotate sensor until reading is achieved.

Transmission Position Switch/Sensor, A/T > < Diagram Information and Instructions|Page 2786