SVX FWD L6-3.3L DOHC (1994)
Fig. 33 SRS Components
4. Loosen nut retaining bracket to passenger's air bag module, Fig. 33.
5. Remove securing air bag module bracket to steering support beam, then the bracket.
6. Disconnect air bag electrical connector.
7. Remove four air bag retaining screws, then the module.
8. Reverse procedure to install, noting the following:
a. Ensure ignition is turned Off.
b. Do not allow harness and connectors to interfere with other components.
c. Tighten air bag attaching bolts to torque listed in Fig. 33.
d. After completing installation, arm SRS as described under Technician Safety Information.