SVX FWD L6-3.3L DOHC (1994)
![background image](/subaru/svx_fwd/l6-3.3l_dohc/Page-243001.png)
Crankshaft Position Sensor: Testing and Inspection
Crank Angle Sensor 1
Crank Angle Sensor Inspection
1.
Remove crank angle sensor 1.
2.
Set the positive (+) probe at sensor connector terminal No. 1, and set earth lead at terminal No. 2.
3.
Check a wave profile appears crossing a magnet near the pick-up coil of crank angle sensor 1.