SVX FWD L6-3.3L DOHC (1994)
5. Using housing stand "REAR" and oil seal installer "REAR", press outer oil seal until it comes in contact with snap ring.
6. Invert both housing stand "REAR" and housing.
7. Invert both oil seal installer "REAR", using it press inner oil seal into housing until it touches bottom.
8. Apply sufficient grease to oil seal lip. Specified grease: SHELL 6459N
a. If specified grease is not available, remove bearing grease and apply Auto Rex A instead.
b. Do not mix different types of grease.
9. Install back plate to rear housing.
10. Using hub stand and hub installer "REAR", press bearing into hub.
