SVX FWD L6-3.3L DOHC (1994)
5. Using housing stand and bearing installer "FRONT", press a new bearing into place.
a. Always press outer race when installing bearing.
b. Be careful not to remove plastic lock from inner race when installing bearing.
c. Charge bearing with new grease when outer race is not removed.
6. Install snap ring in its groove. Make sure to install it firmly to groove.
7. Using oil seal installer "FRONT", press inner oil seal until it contacts circlip.
8. Turn upper side of housing stand, housing and front seal installer down.
9. Using oil seal installer "FRONT", press outer oil seal until it contacts the bottom of housing.
10. Apply sufficient grease to oil seal lip. Specified grease: SHELL 6459N
a. If specified grease is not available, remove bearing grease and apply Auto Rex A instead.
b. Do not mix different types of grease.
11. Install disc cover to housing the three bolts.
12. Attach hub completely to hub stand securely.
