SVX FWD L6-3.3L DOHC (1994)
FILTER BRACKET INSTALLATION
a)
Place the tie-down hook back into position and install the filter bracket on top of the tie-down hook. Using the three "new" bolts supplied in the
kit, secure the bracket and torque the bolts to 50 (ft.lbs.).
FILTER HOSE INSTALLATION
a)
Install hose (D) on the "out" pipe of the filter and hose (C) onto the "in" pipe of the filter. Make sure the chafe protector is in its correct position.
(See Figure 4.)
FILTER TO BRACKET INSTALLATION
a)
Position the filter with the arrow pointing to the left frame rail. The outlet hose must be on top. Clamp the filter to the bracket and make sure the
clamp is around the rubber protector on the filter. (See Figure 5.)
FILTER OUTLET HOSE TO COOLER INSTALLATION
a)
Install hose (D) onto the cooler inlet pipe of the radiator. Secure the hose in the clip on the radiator. (See Figure 6.)
FILTER INLET HOSE TO TRANSMISSION PIPING INSTALLATION