SVX LSi AWD L6-3.3L DOHC (1997)
7) Remove screws which hold fuel injector to fuel injector pipe.
8) Remove fuel injector.
(1) 0-ring B
(2) 0-ring A
(3) Injector body
(4) Insulator
(5) Fuel injector cap
CAUTION:
-
Do not attempt to pry Injectors with a screwdriver or similar tool.
-
Do not pinch injector pin with pliers.
NOTE: If the injector is difficult to remove by hand, remove injector and fuel pipe as a unit, and push injector out from the back.
9) Installation is in the reverse order of removal.
CAUTION: Replace 0-rings and Insulator with new ones.
Tightening torque:
Fuel injector:
3.4 ± 0.5 N.m (2.5 ± 0.4 ft-lb)
Power steering hose bracket:
13 ± 3 N.m (9.4 ± 2.2 ft-lb)