SVX LSi AWD L6-3.3L DOHC (1997)
Power Steering Pump: Service and Repair
Inspection
In accordance with the following table, check all removed parts for wear and damage, and make repair or replacement if necessary. Make a measurement
as follows. If it exceeds the specified service limit, replace the parts with a new one.
1. Fix oil pump assy on a vise to make a measurement. At this time, hold oil pump assy with the least possible force between two wood pieces.
2. Do not set outside of flow control valve or pulley on a vise; otherwise outside or pulley might be deformed. Select properly sized wood pieces.
a. Play of pulley shaft. Service limit:
-
Radial play: 0.4 mm (0.016 inch) or less
-
Axial play: 0.9 mm (0.035 inch) or less