SVX LSi AWD L6-3.3L DOHC (1997)
8. Extract DOJ from differential using drive shaft remover. Use bolt as a supporting point for remover to prevent side bearing retainer from
sustaining damage.
9. Place alignment mark on adjustment bolt.
10. Remove lateral link from sub frame.
11. To install, reverse above removal procedures. Replace self-locking nuts with new ones.
a. When tightening bushing, make sure vehicle weight is on suspension.
b. Align alignment mark when installing adjustment bolt.
INSPECTION
Check bushing for cracks, fatigue or damage. Check lateral links for damage or bends.
DISASSEMBLE