SVX LSi AWD L6-3.3L DOHC (1997)
Shifter A/T: Service and Repair
Removal and Installation
REMOVAL
1. Move the selector lever to "N".
2. Remove the front exhaust cover.
(1) Remove the eight bolts to take off the front exhaust cover.
(2) Remove the front exhaust cover.
-
Be careful not to bend the front exhaust cover when removing.
3. Remove the cable assembly.
(1) Remove the snap pin to separate the cable from the transmission lever.
(2) Remove the clamp from the transmission case.
(3) Disconnect the cable from the selector lever.