SVX LSi AWD L6-3.3L DOHC (1997)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the ground cable from battery.
2. Move the selector lever to "N".
3. Release the parking brake.
4. Jack-up the vehicle and support it with rigid racks.
5. Disconnect connector from rear oxygen sensor.
6. Remove the rear exhaust pipe and the rear catalytic converter.
7. Remove the front exhaust cover.
8. Loosen the four bolts which hold propeller shaft to rear differential.
-
Remove all but one bolt.