SVX LSi AWD L6-3.3L DOHC (1997)
-
Move gear select cable so that extension bolts can be removed.
-
Remove bolts.
-
Remove extension and disconnect duty solenoid C connector.
CAUTION: Do not force extension back before disconnecting solenoid connector. Otherwise, harness may be damaged.
NOTE: Use a container to catch oil flowing from extension.
10. Remove duty solenoid C & transfer valve body from extension.
Remove transfer clutch drum.
-
Remove clamp which secures pipe.
-
Remove bolts.
INSTALLATION
Transfer Duty Solenoid (C)
1. Install duty solenoid C & transfer valve body.
-
Install duty solenoid C & transfer valve body.
-
Install pipe and clamp. Tighten to 7-9 Nm (61-78 in.lb)
-
Install clutch drum.
2. Install extension.
-
Connect connector.
Tighten 11 bolts to 23-26 Nm (17-20 ft.lb)
-
Install gear select cable and tighten to 10-18 Nm (7-13 ft.lb)