SVX LSi AWD L6-3.3L DOHC (1997)
-
Do not allow lip of transfer piston seal to fold back.
3. Install the driven plates, drive plates, and pressure plate, and secure with a snap ring.
4. Apply compressed air to see if the assembled parts move smoothly.
5. Check the clearance:
Standard value: 0.2-0.6 mm (0.008-0.024 in)
Allowable limit: 1.6 mm (0.063 in)
If the clearance is not within the specified range, select a proper pressure plate. Before measuring clearance, place the same thickness of shim on
both sides to prevent pressure plate from tilting.
6. Press-fit the ball bearing.
7. Coat the seal ring with Vaseline, and install it in the seal ring groove of the shaft. Do not expand the seal ring excessively when installing.