SVX LSi AWD L6-3.3L DOHC (1997)
Torque Converter Clutch Solenoid: Service and Repair
REMOVAL
1. Clean transmission exterior.
2. Drain ATF completely.
-
Tighten ATF drain plug after draining ATF to 23-26 Nm (17-20 ft.lb)
3. Remove oil pan and gasket. Drain oil into a container.
4. Disconnect solenoid valve connectors. Remove connectors from clips and disconnect connectors at 5 places.
5. Remove oil strainer. Disconnect oil pipe by removing the two bolts, and remove four bolts and oil strainer. Be careful because oil flows from oil
strainer.
6. Remove control valve body. Remove 8 long bolts (Black) and 11 short bolts (Yellow). Be careful because oil flows from valve body.