Tribeca F6-3.6L (2008)
Front Door Exterior Handle: Service and Repair
Front Outer Handle
REMOVAL
1. Raise the front door glass to the top position.
2. Remove the door trim.
3. Remove the sealing cover.
4. Remove the plug at the rear end of the door panel.
5. Remove the rod clamp.
6. Loosen the bolt (1) and turn bolt (2) five times.
7. Move the front outer handle forward, and detach the front outer handle.
CAUTION: Do not apply excessive force to remove the handle from door panel, not to deform the door panel.
8. Remove the outer side spacer, and slide the frame assembly forward from the inner side, then remove.
INSTALLATION
Install in the reverse order of removal.
NOTE: During installation, make sure that the rod does not have any deformation.