Tribeca F6-3.6L (2008)
secured by the tie bands, tighten if necessary.
Note:
Do not over tighten the tie bands, over tightening will crush the outer sheathing causing the cable to bind. Additional tie bands could be installed if
necessary. Repeat the procedure on the other seat.
(4) Headrest Adjustment
Remove the clip from the headrest post and remove the headrest.
Place the post of the headrest on a white sheet of paper. Trace the post. Spread the post apart 10mm. Retrace and check if the distance between the two
posts increased by 10mm. The post may need to be spread more to obtain the 10mm.
Reinstall headrest and the clip. Repeat procedure for the other two headrests. Reinstall the backrest back covers.
(5) Seat Hinge
