Tribeca F6-3.6L (2008)
Intake Manifold: Removal and Replacement
INTAKE MANIFOLD
REMOVAL
1. Remove the collector cover.
2. Release the fuel pressure.
3. Disconnect the ground cable from the battery.
4. Open the fuel filler flap lid, and remove the fuel filler cap.
5. Remove the air cleaner case and air intake chamber.
6. Remove the generator.
7. Disconnect the connector (A) from the throttle body.
8. Disconnect the engine harness connector (B).
9. Disconnect the engine coolant hoses from the throttle body.
10. Disconnect the PCV hose.
11. Disconnect the brake booster hose.
