Tribeca F6-3.6L (2008)
INSTALLATION
1) Install the water pump to oil pan upper.
NOTE:
^
Tighten the bolts in the numerical order as shown in the figure.
^
Use new O-rings.
Tightening torque: 6.4 N-m (0.65 kgf-m, 4.7 ft-lb)
2) Install the timing chain assembly.
3) Install the chain cover.
4) Install the crank pulley.
5) Install the V-belt.
6) Install the radiator.
7) Fill engine coolant.
INSPECTION
1) Check the water pump bearing for smooth rotation.
2) Check the water pump sprocket for abnormalities.