Tribeca F6-3.6L (2008)
Air Register: Service and Repair
Air Vent Grille
REMOVAL
1. UPPER GRILL
1. Disconnect the ground cable from the battery.
2. Lift the upper grill, and remove the catch on the hazard switch side.
3. Hold the side of the monitor and remove the catch on the upper, right and left sides.
4. Detach the connectors and remove the panel.
2. CENTER GRILLE
1. Disconnect the ground cable from the battery.
2. Remove the front control panel.
3. Remove the screw, and remove the center grill
3. SIDE GRILLE
Remove the catch in 2 locations to remove the side air vent grill.