Tribeca F6-3.6L (2008)
Refrigerant Oil: Procedures
Compressor Oil
PROCEDURE
NOTE: Before making repairs, perform the oil return operation to return the compressor oil in circulation with the refrigerant to the compressor.
1. Increase the engine to 1,500 rpm.
2. Turn on the A/C switch.
3. Turn the temperature control switch to MAX COOL.
4. Put in RECIRC position.
5. Turn the blower control switch to HI. (For models with rear coolers, also turn the rear cooler fan switch to HI)
6. Leave in this condition for 10 minutes.
