Tribeca F6-3.6L (2008)
Auxiliary Power Outlet: Service and Repair
Rear Accessory Power Supply Socket
Rear Accessory Power Supply Socket
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the left rear quarter lower trim.
3. Disconnect the harness connector, and remove the accessory power supply socket.
NOTE: The socket can be pulled out by unlocking the accessory socket lock in 2 locations and turning the socket to the left.
INSTALLATION
Install in the reverse order of removal.
NOTE: Confirm that the accessory socket is locked and can not be pulled out.