Tribeca F6-3.6L (2008)
8. Apply two types of primers to the adhesive layer of glass using sponge.
Glass primer:
Dow Automotive
ESSEX U-401, U-402
9. Apply the primer to the adhesive layer of body.
Painted surface primer:
Dow Automotive
ESSEX U-413
NOTE:
-
Primer once attached to the painted surface of the body and internal trim is hard to wipe off. Mask the circumference of such area.
-
Let primer dry for about ten minutes before installing the glass.
-
Do not touch the surface coated with primer.
10. Cut off the cartridge nozzle tip as shown and set it in sealant gun.