subaru Workshop Repair Guides

Subaru Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Windshield Washer Reservoir: Removal and Replacement

Washer Tank And Motor

REMOVAL

1. Open the front hood.
2. Disconnect the ground cable from the battery.
3. Remove the front bumper.
4. Remove the clip holding washer water supply tap.

5. Remove the two bolts and one nut, hose, connector and washer motor cover, and then remove the washer tank.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 6.0 N.m (0.61 kgf.m, 4.4 ft.lb)

Wiper and Washer Systems > Windshield Washer Reservoir > Component Information > Service and Repair > Removal and Replacement

< PREV PAGE NEXT PAGE >