XT-6 2WD L6-2.7L SOHC (1989)
Drive Belt: Service and Repair
Except XT6
Where applicable, always replace drive belts in pairs.
First Drive Belt
Fig. 62 Alternator Mount & Slide Bolt Location
Fig. 58 Drive Belt Routing & Tension Data
1.
Loosen alternator mount and slide bolts, Fig. 62.
2.
Remove drive belt.
3.
Install drive belt. When proper belt tension is achieved, as specified in Fig. 58 tighten alternator slide and mount bolts, Fig. 62.
4.
For new belt installation, readjust belt tension to specifications after running engine for five minutes.
Second Drive Belt
Fig. 63 Idler Pulley Retaining Bolt & Nut Location