XT-6 2WD L6-2.7L SOHC (1989)
-
Remove BELT ADJUSTER STOPPER from belt tension adjuster.
Note: Check that the end of left tensioner arm contacts top of belt tension adjuster. Make sure that flywheel timing mark and camshaft sprocket
LH timing mark are in their normal positions.
6. Install timing belt RH.
-
Turn crankshaft one turn clockwise from the position where timing belt LH was installed and align the center of three lines scribed on the
flywheel with timing mark on flywheel housing.
-
Align timing mark on camshaft sprocket RH with the notch in belt cover.
-
Temporarily tighten bolts (a) and (b) while moving the right tensioner down in the direction of the arrow. Loosen bolt (a) 180°.
