XT-6 2WD L6-2.7L SOHC (1989)
7. Install belt cover CTR.
8. Install crankshaft pulley to crankshaft using FLYWHEEL STOPPER or DRIVE PLATE STOPPER to lock crankshaft.
Special Tool: FLYWHEEL STOPPER (498277000)(manual transmission model) or DRIVE PLATE STOPPER (498497000) (automatic
transmission model)
Note: When tightening bolt, apply engine oil to the threads, then tighten.
Tightening torque: 89 - 107 N-m (9.1 - 10.9 kg-m, 66 - 79 ft-lb)
9. Install oil level gauge guide.
Tightening torque: 4.4 - 5.4 N-m (0.45- 0.55 kg-m, 3.3 - 4.0 ft-lb)
10. Install water pipe. Apply coolant to O-ring beforehand.
11. Install water pump pulley to water pump ASSY, and tighten nuts temporarily.
12. Install belt covers RH and LH.
13. Install compressor (A/C).
14. Install alternator.
15. Install V-belt and apply proper tension to the belt.
-
Loosen belt tension pulley lock nut.