XT-6 2WD L6-2.7L SOHC (1989)
Evaporator Core: Service and Repair
Removal and Installation
Evaporator Core
REMOVAL AND INSTALLATION
1. Disconnect battery negative terminal.
2. Discharge refrigerant.
3. Disconnect discharge pipe, suction pipe and grommets.
4. Remove glove box.
5. Remove glove box support bracket.
6. Disconnect the harness connector from evaporator.
7. Disconnect drain hose.
8. Remove evaporator mounting bolt and nut.
9. Install the evaporator in the reverse order of removal.