XT-6 2WD L6-2.7L SOHC (1989)
Timing Belt: Service and Repair
Removal
Belt Cover
NOTE:
-
Be careful not to let oil, grease or coolant contact the timing belt.
-
All removed parts, if to be reused, should be reinstalled in the original positions and directions.
-
Gaskets and lock washers must be replaced with new ones. Liquid gasket should be used where specified to prevent leakage.
-
Bolts, nuts and washers should be replaced with new ones as required.
-
Even if necessary inspections have been made in advance, proceed with ASSY work while making rechecks.
1. Loosen water pump pulley mounting bolts.
2. Loosen two alternator mounting bolts.
