XT-6 2WD L6-2.7L SOHC (1989)
Inhibitor Switch Adjustment
ADJUST INHIBITOR SWITCH
1.
Loosen three inhibitor switch securing bolts.
2.
Shift select lever to "N" range.
3.
Insert stopper pin (499267300) as vertical as possible into the holes in inhibitor switch lever and switch body.
4.
Tighten three bolts to 2.0-2.5 Nm (1.4-1.9 ftlb).
5.
Repeat the previous tests. If switch still checks faulty, replace it.