XT-6 4WD L6-2.7L SOHC (1988)
Trunk / Liftgate Spring: Technical Service Bulletins
Torsion Spring Tool - Update Information
NUMBER 14-11-88
DATE
7-11-88
APPLICABILITY
1985 TO PRESENT 4DR SEDAN AND XT MODELS
SUBJECT:
TORSION SPRING TOOL P/N S0A443F400 UPDATE
REFER TO SERVICE BULLETIN NUMBER 14-09-84, DATED 11-20-84, FOR INFORMATION ON HOW TO PROPERLY USE THE TORSION
SPRING TOOL
To prevent the torsion tool from contacting the rear seat frame on 4-Door Sedan models and increase the overall tool performance, the following update
should be made:
^
Cut a section of either heater hose or equivalent, size 1/2" I.D. x 1" O.D. x 4.25".
FIGURE 1
^
Install the section of hose over the spindle. See figure 1.