XT-6 4WD L6-2.7L SOHC (1988)
16.
Apply engine oil to all sliding surfaces of camshaft and rockers, then install rocker covers and reconnect PCV hoses.
17.
Install camshaft sprockets, timing belts and center belt cover, then the oil filler duct and water pipe.
Fig. 23 Positioning No. 1 Cylinder At TDC
18.
Position No. 1 cylinder at TDC, ensuring camshaft sprocket timing marks are positioned as shown, Fig. 29.
19.
Align mark on distributor housing with mark on distributor gear, then install distributor and mounting bolt.
20.
Reconnect distributor electrical wiring, then install left and right timing covers.
