XT-6 4WD L6-2.7L SOHC (1988)
FIGURE 11
5.
After adjusting the cable to the proper tension tighten the lock nut to 8 ft.lbs. to secure the cable adjuster.
6.
Reinstall the electric motor using the three phillips retaining screws.
NOTE:
Make sure to transfer the original cable securing clip to the new cable. See Figure 11.
REINSTALL THE REGULATOR ACCORDING TO THE APPLICABLE SERVICE MANUAL
Ensure the proper operation of the power window.
This procedure can be claimed for vehicles within the terms of the Subaru Limited Warranty using the following warranty information:
OPERATION NUMBER
FAILURE CODE
TIME
Door Glass R&R B914-511
-
0.6
Window Regulator R&R C914-531
-
0.2
Models with power windows add
0.3
Window regulator Cable R&R C914-571
SHN-01,16
0.2
(window regulator cable)